機器人模型完成后，需要進行驗收確保制作出來的模型符合展示公司的營銷策略與外觀要求，如機器人模型完成存在誤差與突發狀況便于及時進行更改。那么機器人模型的驗收標準怎么樣呢？大型機器人模型制作廠家為您解說。

After the robot model is completed, it needs to be checked and accepted to ensure that the produced model meets the marketing strategy and appearance requirements of the exhibition company. If the robot model is completed with errors and emergencies, it is convenient to change it in time. What about the acceptance criteria of the robot model? The manufacturer of large-scale robot model will explain it to you.

一、仿真度與精細度

1、 Simulation and fineness

1.機器人模型都是按照設備進行縮小或放大，所以在制作后需要對其模型的外觀尺寸進行確認，是否符合設計圖紙的制作要求。

1. The robot model is reduced or enlarged according to the equipment, so the appearance size of the model needs to be confirmed after production to see if it meets the production requirements of the design drawings.

2.這里需要展示公司負責人進行現場核對，從而避免圖紙與設計圖紙中存在的尺寸差異，也是雙方公司進行現場確認機器人模型的道流程。

2. It is necessary to show that the person in charge of the company conducts on-site verification, so as to avoid the size difference between the drawings and the design drawings, which is also the process for both companies to confirm the robot model on site.

二、結構

2、 Structure

1.機器人模型展示的主題也是存在不一致的，有的公司模型展示工業產品的外觀，有的展示工業產品的內部結構，還有的展示其產品的工作原理。

1. The theme of robot model display is also inconsistent. Some company models show the appearance of industrial products, some show the internal structure of industrial products, and some show the working principle of their products.

2.在進行驗收時，注意機器人模型的展示主題，進行確認其內部構造與外觀問題。

2. During the acceptance, pay attention to the display theme of the robot model, and confirm its internal structure and appearance problems.

三、燈光效果

3、 Light effects

1.燈光效果在機器人模型中不是哪里都能使用的到，有些需要動態演示的機器人模型需要設置燈光，以達到工業產品運行中的效果。

1. The light effect can not be used anywhere in the robot model. Some robot models that need dynamic demonstration need to be set with lights to achieve the effect in the operation of industrial products.

2.在這里需要對自身產品在運作中散發的光源進行確認，是否符合真實工業產品運行時的燈光場景。

2. Here, it is necessary to confirm whether the light source emitted by the product in operation conforms to the light scene of the real industrial product in operation.

四、污漬處理

4、 Stain treatment

1.在制作機器人模型后，模型會留下一些比較難處理的污漬，污漬處理不好將影響到機器人模型的展示效果，在驗收時，注意機器人模型周邊是否存在污漬，如有則要求模型公司進行處理。

1. After the robot model is made, the model will leave some stains that are difficult to deal with. Poor stain treatment will affect the display effect of the robot model. During acceptance, pay attention to whether there are stains around the robot model, and ask the model company to deal with them if there are any.

為了避免在機器人模型完成后，展示公司需要進行細節修改，所以在初步制作完成后，需要邀請展示公司負責人進行驗收，保證機器人模型和設計圖紙無誤，需要將提供驗收流程供驗收人員進行驗收。關注我們http://www.68722.cn，了解更為詳細的事情！

In order to avoid the need for the exhibition company to modify the details after the completion of the robot model, it is necessary to invite the person in charge of the exhibition company for acceptance after the preliminary production is completed, to ensure that the robot model and design drawings are correct, and to provide the acceptance process for the acceptance personnel. Follow us http://www.68722.cn For more details!